Best Gloves? Let’s find out! Milwaukee, Ironclad, Mechanix, Carhartt

Instruksjoner og stil

Which gloves are best? Let’s find out! Brands tested: Ironclad, Mechanix, Carhartt, Amazon Basics, VGO, Endura, Milwaukee, Wells Lamont, and PVC dotted gloves. Gloves tested for puncture, abrasion resistance (wear), impact protection, cut resistance, and grip. I purchased all of the gloves tested and never accept sponsorships.
➡ Thank you very much for supporting the channel: www.patreon.com/projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: noprojects.info/desk/2rzsm1Qi6N1X-wuOg_p0Ng.html

A lot of viewers have requested I provide Amazon affiliate links to help them find the products I test and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. I always recommend shopping around for a better price. Thank you for supporting the Project Farm Channel through affiliate links.
➡ Products Tested In This Video (in no particular order):
IronClad: amzn.to/3u5dD3x
Mechanix: amzn.to/3d5yVXC
Amazon Basics: amzn.to/3cqOuKz
VGO: amzn.to/2P5JS3O
Carhartt: amzn.to/3splpVn
Endura: amzn.to/3svR1J4
Wells Lamont: amzn.to/31q8l6i
PVC Dotted Gloves: amzn.to/3fmoRfB
West Chester: amzn.to/3cuKrwN
Milwaukee: www.homedepot.com/p/Milwaukee-Large-Level-5-Cut-Resistant-Goatskin-Leather-Impact-Gloves-48-22-8782/312870134
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/2SvwQdS
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

Kommentarer

  • Big Zeus
    Big ZeusTime siden

    Where are those $5 harbor freight gloves?

  • Project Farm

    Project Farm

    11 minutter siden

    Thanks for the video idea.

  • Mix Master Muffins
    Mix Master MuffinsTime siden

    Love the new score chart at the end.

  • Joseph Anderson
    Joseph AndersonTime siden

    We shall call you Mr. Ingenuity

  • Mike Morton
    Mike MortonTime siden

    Have you ever compared paint brushes? I always wondered if the hair rushes were better for not leaving bubbles with varnish.

  • Carroll McPherson
    Carroll McPhersonTime siden

    Project Farm, I really appreciate the science you do. I think you should you should get some kind of honorary degree from your local university for the practical studies you accomplish for the layman. Carry on!

  • J Jaye
    J Jaye2 timer siden

    A video of this quality with 600k views and only 28k likes is criminal. Hit that like button folks!

  • mattmanjack
    mattmanjack3 timer siden

    What's the best battery power washer

  • John Powell
    John Powell4 timer siden

    One other thing about gloves is user feel and dexterity, I keep a couple pairs of the cotton ones with dots or some with criss cross pvc or some sticky material for carrying heavy doors that are hand finished and very slippery. Not concerned about abrasion, animal traps or thorns. Different product different job. Good work on these videos, maybe this opens up a chance for another one.

  • kyle nelson
    kyle nelson4 timer siden

    what is the best parts washing fluid? id watch that! i mean, i watch them all... but still.

  • ALPHA RACING
    ALPHA RACING4 timer siden

    Best battery desulfator and do they work should be next!

  • John Doe
    John Doe5 timer siden

    I've always wondered if the various different types of stranded wire connectors and crimps have some that are better. Esp now with the new heat shrink models that vary wildly in cost. Would be great to see a comparison there. Huge differences in time to install, some more finicky to install properly than others and big swings in price. Sounds like a job for Project Farm.

  • Brent Banning
    Brent Banning6 timer siden

    Please do testing on paint remover, maybe test on old car hood, or tractor fender, Urethane, enamel, epoxy, paints, those are hardest to remove. Thanks

  • david fulginiti
    david fulginiti7 timer siden

    So well done, thanks 💪👍

  • Project Farm

    Project Farm

    7 timer siden

    You are welcome!

  • Jason Ingram
    Jason Ingram7 timer siden

    The Wells Lamont leather gloves that I have I can tell you for 100% fact that they are probably the softest gloves that have ever touched my skin as far as the exterior goes. I have the same style Milwaukee leather gloves too. I also have the more basic all leather Milwaukee gloves too. Those Wells Lamont are like silk though! You should definitely test leather gloves like full leather. I wish you had done the Honeywell Rig Dog safety gloves. I was thinking about buying some a few years back I got into panelizing steel stud walls for hotels 2 years ago. They claim to be the best of the best of the best climbing to have the best grip, impact resistance, breathability, as well as cut and abrasion resistance on the market. I just didn't want to spend the kind of money that they're asking for those gloves without actually seeing them and without knowing something about them other than what Honeywell claims.

  • Jason Ingram

    Jason Ingram

    Time siden

    @Project Farm OMG OMG OMG!!! I got recognized and replied to by a famous celebrity!!! Thank you man I really appreciate it that made my day I never get recognized in the comment section! You are even more epic and awesome then I previously imagined because you actually value your fan base and listen to them! Believe it or not I actually have a ton of great ideas for your show even ideas on how to test things. Like for instance I think a good way to test your drills would be to have it hanging from a rope or string of some sort with a drill bit and just let only the weight of the drill be the driving force of it I'm sure if you were secure the handle and keep it from twisting from the torque and just let the weight of the drill itself be what pushes the bit into whatever material I honestly feel like that would be a much better gauge of its power because there's always going to be slight variations on how hard a person pushes down whether or not they have the drill closer to their body or further away even just small minute differences like that. Sometimes I have really great original ideas and other times I'm even better when it comes to bouncing ideas off of me and vice versa. People like to call me the poor man's Tony Stark because I always come up with some insane little ideas and ways to make things work with either very limited amount of material that I have to work with or just and off the wall way to do something because that's the only way it'll work in the first place.

  • Project Farm

    Project Farm

    7 timer siden

    Thanks for the video idea.

  • Furious Fisherman
    Furious Fisherman8 timer siden

    what about at what Lbs do bolts strip with different thickness of metals. great upload as always cheers

  • Project Farm

    Project Farm

    7 timer siden

    Thanks for the video idea.

  • Malachi Davie
    Malachi Davie9 timer siden

    Awesome man! Love the effort and how well you put everything together for us viewers ! All the best from New Zealand !

  • Project Farm

    Project Farm

    7 timer siden

    Thanks!

  • Gfyg Cristian
    Gfyg Cristian9 timer siden

    I love your channel, It provides us with a real picture of the actual capability of the products most of us buy and use. I'm a plumber by trade and some of your videos were a real eye opening in a world filled with overstatements. Cristian, 🇮🇪

  • Project Farm

    Project Farm

    7 timer siden

    Thanks!

  • Michael Frei
    Michael Frei9 timer siden

    Do a video on rechargeable batteries! AA, AAA, C, D, 9v

  • Project Farm

    Project Farm

    7 timer siden

    Thanks for the video idea.

  • Mike Formichelli
    Mike Formichelli10 timer siden

    Wow. Nothing made in the USA?

  • Jarett Tanner
    Jarett Tanner10 timer siden

    I’d love to see if those eGo tools keep up with traditional gas powered tools.

  • Project Farm

    Project Farm

    7 timer siden

    Thanks for the suggestion.

  • Vetko's Garage
    Vetko's Garage11 timer siden

    Can you do cheap gas saw comparision?

  • Project Farm

    Project Farm

    7 timer siden

    Thanks for the video idea.

  • Йордан Янков
    Йордан Янков11 timer siden

    Hey, how about making a cylinder head out of concrete :)

  • Project Farm

    Project Farm

    7 timer siden

    Thanks for the suggestion.

  • DJ Diverse
    DJ Diverse12 timer siden

    We need his kind of thorough testing for the vaccines lol

  • mason dipple
    mason dipple12 timer siden

    Ive learned a lot through this channel and i went from a computer programming nerd with no interest, to a shop nerd with a lot of interest in the span of a year. This channel has changed me and im thankful I have had so much free time

  • Project Farm

    Project Farm

    6 timer siden

    Thanks!

  • George Cristian Sandescu
    George Cristian Sandescu12 timer siden

    HEY PF...GREAT VIDEOS ALLROUND !!! CAN YOU DO ONE WITH DC TO AC POWER INVERTERS??? CHEERS

  • Project Farm

    Project Farm

    6 timer siden

    Thanks! Thanks for the video idea.

  • MotoJayMN
    MotoJayMN12 timer siden

    Best engine degreaser would be a good video.

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the video idea.

  • DJ Diverse
    DJ Diverse13 timer siden

    You say you read every comment? This is just a test! 🤣

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for sending a comment!

  • rbnhd1976
    rbnhd197613 timer siden

    Hey Project Farm how about rust converters for surface rust thanks

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the video idea.

  • gavinc miller
    gavinc miller13 timer siden

    Hey Project Farm! You should use beef tallow as engine oil??? Could be fun

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the suggestion.

  • Michael Arnold
    Michael Arnold14 timer siden

    Could you please do a test on Demo circular saw blades?

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the video idea.

  • HumpDay
    HumpDay14 timer siden

    No Harbor Freight brand again? What's goin on here??

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the video idea.

  • XxAILASxX
    XxAILASxX14 timer siden

    Should have tested schmittz mittz

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the suggestion.

  • Mr Alerts
    Mr Alerts14 timer siden

    Todd, I would love to see a video comparing torque wrenches! Love your work, you are a legend!

  • Project Farm

    Project Farm

    6 timer siden

    Great suggestion! Thank you.

  • Slippery Cman
    Slippery Cman14 timer siden

    Hey man I have a great video idea! Please test tool storage systems like the Milwaukee pack out, dewalt tough system, etc. you could do tests like how water proof they are, shock and impact resistant, etc. would absolutely love that video!

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the video idea.

  • James
    James15 timer siden

    Now I know how to protect my hands so I can continue to comment on your videos. Also a few other test you could do on these include water resistance, washer durability, heat protection and sun wear

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the suggestion.

  • Paul Yuneps
    Paul Yuneps15 timer siden

    Am I missing something? I don't see the (show more) drop down to reveal the style of the brands tested and a price on Amazon

  • Paul Yuneps

    Paul Yuneps

    15 timer siden

    ....cause my google search shows Milwaukee glove from $12-26 and none like shown

  • Paul Yuneps
    Paul Yuneps15 timer siden

    It appears you sharpened the jaws of the trap, the only ones I've seen were square cut from the press they were cut out on.

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the feedback.

  • Bubba Hyde
    Bubba Hyde15 timer siden

    Synthetic leather is authentic what?

  • Jesse Short
    Jesse Short15 timer siden

    Coil spring test device, huh? Nice.

  • Project Farm

    Project Farm

    6 timer siden

    Thanks!

  • John Carlson
    John Carlson15 timer siden

    One minor correction. hanging 5 pounds on each side of the material will only result in 5 pounds of tension on the material not 10 pounds. Picture a pully attached to the ceiling, you attach a rope to the floor, pull it through the pully and then attach a fish scale to the hanging rope end (we are also assuming the rope and scale have a negligible weight). If you then add 5 pounds to the end of the scale. The scale will read 5 pounds. If you then untied the rope from the floor and put 5 pounds on that end (balancing the load) your scale would still read 5 pounds, not 10. The glove material is acting like the rope in this example.

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the constructive feedback.

  • mr.T C
    mr.T C16 timer siden

    Nothing made the the USA or Europe. What a shame globalization is.

  • tony monastiere
    tony monastiere16 timer siden

    I'll bet the Milwaukee will be able to hold a beer better than the others, also!!!

  • 13ryman
    13ryman16 timer siden

    My vehicle wiring is getting older. Can you test what electrical contact cleaner works best. I've tried a few but the salty winter roads of the Midwest cause corrosion quite quickly.

  • Project Farm

    Project Farm

    6 timer siden

    Great suggestion! Thank you.

  • Shyon Rezaie
    Shyon Rezaie16 timer siden

    Can you do a test on oil leak additives? One including that AT205. Maybe a test using equally worn seals in a rig to see how much, if any, oil seeps past the seals before and after the product is applied?

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the video idea.

  • Dariusz Basiaga
    Dariusz Basiaga17 timer siden

    Also can you test high mileage oils like castrol edge and pennzoil gold HM etc

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the video idea.

  • Dariusz Basiaga
    Dariusz Basiaga17 timer siden

    Strange request but can you test grass patch products and their germination rate/success?

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the suggestion.

  • Stacy Reid
    Stacy Reid17 timer siden

    What about gloves against grinders

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the suggestion.

  • Krish Ram
    Krish Ram17 timer siden

    I once got in a scrap with a real rough piece of steel, fell and caught my hand real good. wouldve lost my finger if i wasnt wearing a decent pair of work gloves. thanks milwaukee.

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for sharing!

  • MUFFINS!!! MUFFINS!!!
    MUFFINS!!! MUFFINS!!!17 timer siden

    1. Paper towels, shop towels, disposable towels, etc 2. insulation and different combinations for best efficiency 3. caulk/adhesive removal 4. concrete brand strength and comparing varying amounts of water to see strength 5. drywall tape/mesh/fibafuse 6. paint/oil/marker removal 7. hydrophobic coatings 8. tile hole saws 9. thinset brands for tile

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the video ideas.

  • Michael Klein
    Michael Klein17 timer siden

    Any progress on an oil filter video? Thanks

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the video idea.

  • Tom Condon
    Tom Condon17 timer siden

    I have everyday pig skin gloves, and thick deer hide. Milk thistle goes through them like butter. Pig skin is tough and thin.

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for sharing.

  • Michael Lakner
    Michael Lakner17 timer siden

    Great content, could you consider doing a video on best kitchen knives, or butcher block knife brand.

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the video idea.

  • Bob Brown
    Bob Brown17 timer siden

    Can you do a review of bench vises?

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the video idea.

  • Austin Green
    Austin Green17 timer siden

    I love watching all of your videos! Would it be possible for you to test the Archoil AR9100 Oil additive with diesel oil? I would love to see the results and I’m sure my fellow diesel owners would as well!

  • Project Farm

    Project Farm

    6 timer siden

    Great suggestion! Thank you.

  • Villain Mean13
    Villain Mean1317 timer siden

    Haven’t finished video yet, but what impact will actually break fingers ??

  • Derek Straka
    Derek Straka17 timer siden

    So now lets test Milwaukee gloves stopping a bullet lol

  • Villain Mean13
    Villain Mean1317 timer siden

    I always thought the dots went palm side for grip.... who knew, always learning something on this channel I wasn’t looking for, came here for damage report, learned I use gloves wrong.... Wait I think I heard it wrong...

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for watching!

  • Unlucky Eddy
    Unlucky Eddy17 timer siden

    I could have sworn I was subscribed to you, yet I had to hit the subscription button again.

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the feedback.

  • Minecraft guy
    Minecraft guy17 timer siden

    Automatic tape measure

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the video idea.

  • blessedinjax
    blessedinjax18 timer siden

    This was a great video I go through gloves a lot as I wear them all day everyday I’m always trying different brands looking for something stronger Crazy thing is my current pair I’m using for the first time are ironclad and are holding up well and due to this video I will definitely buy them again

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for sharing.

  • Strelok blackburn
    Strelok blackburn18 timer siden

    i have a pair of the mcr predators, they're decent at 25$

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for sharing.

  • megaman382
    megaman38218 timer siden

    I think on the mechanix gloves you used one of the unprotected fingers for the crush test. I own a pair and the index finger doesn't have a crush protection on it.

  • Project Farm

    Project Farm

    6 timer siden

    Thanks for the constructive feedback.

  • Sacky Chin
    Sacky Chin19 timer siden

    PIG FDT all the way

  • Uncledoug
    Uncledoug19 timer siden

    Diagonal cutters HD and sharper flush cut, water pump, needle nose, pliers pliers pliers please

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the video idea.

  • BrockGrimes
    BrockGrimes19 timer siden

    How bout testing these bits. sanrico.com/products/ultimate-drill-bits

  • Gordon Teixeira
    Gordon Teixeira19 timer siden

    Literally just subscribed as i found the most useful and interesting channel on youtube 😅 your a gem sir

  • Gordon Teixeira

    Gordon Teixeira

    19 timer siden

    @Project Farm WOW! The fact you took the time to like and reply! That tells me everything about how much you appreciate your audience. Now i will be watching all your videos over the next week or so, hitting all thumbs up, and let friends know about your channel. Looking forward to the next one. Much love from the island of Oahu 🤙🏽

  • Project Farm

    Project Farm

    19 timer siden

    Wow, thanks! Thanks for watching and subscribing!

  • Chris USA
    Chris USA20 timer siden

    This is a great video. NEW Suggestion for testing: Fluid extractor vacuum pumps for changing oil and other fluids in small and large engines / transmissions / pumps, etc. Example: OEM Tools 5.3 liter oil extractor.

  • Project Farm

    Project Farm

    20 timer siden

    Thanks! Thanks for the video idea.

  • rustysuperbike
    rustysuperbike21 time siden

    Everyone's waiting for the "project farm approved" kite to appear on their tools and ppe!!

  • Project Farm

    Project Farm

    20 timer siden

    Thanks for the feedback.

  • Max Powers
    Max Powers21 time siden

    Did anyone else have "American Woman" start playing in their head @ 00:51 Or was it just me.

  • Brian Lawson
    Brian Lawson21 time siden

    Video Idea: strongest UV activated adhesive

  • Project Farm

    Project Farm

    20 timer siden

    Thanks for the video idea.

  • Treemaster16
    Treemaster1621 time siden

    Can you please please make a video on those insulated bags you get from the grocery store im obsessed with them and wonder which are the best and even how well they work at all thank you.

  • Project Farm

    Project Farm

    20 timer siden

    Thanks for the video idea.

  • James Mortimer
    James Mortimer21 time siden

    test muffler putty's/ tapes...

  • Project Farm

    Project Farm

    20 timer siden

    Thanks for the video idea.

  • Kennith
    Kennith22 timer siden

    Hi there, you have done quite a few battery based jump starters. How about comparing a super capacitor based version, Something like the Autowit SuperCap 2 Battery-Less Portable Jump Starter.

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the video idea.

  • Koi5150
    Koi515022 timer siden

    need some new gloves!

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for sharing.

  • Jay Black
    Jay Black22 timer siden

    How about sharpening stones for chisels and planes. Water stone/oil stone/diamond. Reviews of these things are all over the place.

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the video idea.

  • Minnesotaman
    Minnesotaman22 timer siden

    can you do a video on hammers i see a lot of different hammers talk about their "shock/vibration reduction" im curious which one does the best job at shock absorption also what is more durable 1 piece steel construction or a wooden handle

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the video idea.

  • Steven Rotolo
    Steven Rotolo22 timer siden

    I have a suggestion, review adhesive remover products like goo gone, black jack (my personal favorite and godsend), etc.

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the suggestion.

  • Nate W
    Nate W22 timer siden

    As usual Milwaukee is hard to beat

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the feedback.

  • sinister x
    sinister x23 timer siden

    Please do a video on Wich LED headlight bulb conversion kit is best

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the video idea.

  • Joe 572 Hemi
    Joe 572 Hemi23 timer siden

    Hi , love your vids..I would like to see you test different types & brands of water pipe thread sealant. I'll name some brands at the end...This would be for water at @100psi, a bit higher then normal street pressure. Temperature 160 degrees,the high end of some hot water boilers. If you want you can also not use such a high temp. Brands& types" Telflon tape, white, Blue Monster,Permatex thread sealent,Rectorseal 23631,Rectorseal 25631, Hercules Megaloc

  • Project Farm

    Project Farm

    19 timer siden

    Thanks! Thanks for the video idea.

  • Tennessee Jeff
    Tennessee Jeff23 timer siden

    What about a video about rechargeable batteries such as Milwaukee and or dewalt and getting the most life from them. Leave them on charger or not, store them in warm climate or cold etc etc

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the video idea.

  • JF Mustang
    JF Mustang23 timer siden

    We have work gloves, now try work boots

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the video idea.

  • Alex Baxter
    Alex Baxter23 timer siden

    Coil spring test device.. is that not a trap?

  • Project Farm

    Project Farm

    19 timer siden

    It is a trap.

  • peter nelson
    peter nelson23 timer siden

    I can never understand why you get any thumbs down.

  • Marlon Lynch
    Marlon LynchDag siden

    You should do a videos on the best wheel/tire cleaner. Also on tire shine. Everyone has high claims in that area.

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the video idea.

  • Martin Oplt
    Martin OpltDag siden

    Please, do a video with FARMABAGO:)

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the suggestion.

  • Jaquan Beasley
    Jaquan BeasleyDag siden

    Video idea best tie downs maybe?

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the video idea.

  • Mar Celo
    Mar CeloDag siden

    Never, EVER, use ANYTHING related to safety from China.

  • Jeff Thorstad

    Jeff Thorstad

    17 timer siden

    The glove that won this test was made in China.

  • Solahi Fuefos
    Solahi FuefosDag siden

    I have a question, when doing the impact test at the start did you have the wooden dowels facing the same way with grain direction? i feel like impacting the grain at different directions could effect the end results

  • Rodrigo Apodaca Nieblas
    Rodrigo Apodaca NieblasDag siden

    you should do 1/2 in Mid-Torque impact wrenches! Love the channel

  • Project Farm

    Project Farm

    19 timer siden

    Thanks! Thanks for the video idea.

  • Rodrigo Apodaca Nieblas
    Rodrigo Apodaca NieblasDag siden

    Flex tools vs Milwaukee Flex tools vs Makita

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the video ideas.

  • Bennett Lawrence
    Bennett LawrenceDag siden

    I’m sorry but I don’t know why you just didn’t test snap-on

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the suggestion.

  • Richard Wolfe
    Richard WolfeDag siden

    PLEASE PLEASE SHOW AMPERAGE LOSS ON 10-12-14GAUGE WIRES AT 20'- 50'- 100' AND the AIR PSI LOSS from 1/4" to 3/8" hoses!!!!!!!

  • Richard Wolfe

    Richard Wolfe

    8 minutter siden

    @Project Farm everybody shows that air pressure test on pneumatic guns when we need to see it on pneumatic nailers into Hardwood

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the video idea.

  • c k
    c kDag siden

    I'm in the middle of a project and quite disappointed in 3M Super 77 adhesive spray, touted as one of the best construction adhesive sprays. Takes too long to set, then never works unless it's with a very lightweight material. Have you done a video of these? Specifically spray can adhesives.

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the video idea.

  • bmtkid00
    bmtkid00Dag siden

    Searched your videos was hoping to find one for radiator additive that reduces engine heat and coolant temperature such as VP Racing Fuels Madditive Cool Down. Didnt find any of sort. Maybe this could be your next test if you havent already made one. Cheers, love learning about the products you test :)

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for sharing.

  • John Talbert
    John TalbertDag siden

    What, no harbor freight gloves?

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the video idea.

  • dross8580
    dross8580Dag siden

    I would love to see a automotive airfilter test. Testing which filter passes the least particulates. With regular filters vs cotton filters like s&b or k&n

  • Project Farm

    Project Farm

    19 timer siden

    Great suggestion! Thank you.

  • Charles Petit
    Charles PetitDag siden

    Please do a caulk comparison!! Cracking, paint coverage, etc. Like so he sees!!

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the video idea.

  • Denis Troshin
    Denis TroshinDag siden

    A video idea: best hand cuffs

  • Project Farm

    Project Farm

    19 timer siden

    Thanks for the suggestion.

  • John Smith
    John SmithDag siden

    Because of your video. I cant find those gloves

  • Project Farm

    Project Farm

    19 timer siden

    Sorry to hear!

Neste